Ultrafin Plus
Development
Time and Temperature Table
Ultrafin Plus is an all-round developer concentrate for most Black and White roll and sheet films. Processing results can be varied by the dilution of the developer concentrate. Ultrafin Plus should be used as a one-shot developer in rotary processing and mixed just prior to use. Ultrafin Plus concentrate has excellent keeping properties for up to 6 months in a tightly closed bottle.
Listed below are recommended times for processing most popular films. Depending on your enlarger type, select the appropriate table below. For diffusion, cold light and dichroic enlargers use table one (click here). For condenser enlargers use table two (click here). When processing in a JOBO rotary processor a five minute pre-soak is recommended.
All development times listed are for processing at 20° Celsius (68° F). For processing at temperatures other than 20° consult the time correction factors for various temperatures below (click here).
For a Celsius to Fahrenheit temperature conversion chart, go to the Conversion Tables page.
Back to TopTABLE #1 DIFFUSION, COLD LIGHT AND DICHROIC ENLARGERS
Film Type/Speed Dilution 1:4 Dilution 1:6 Rotary Inversion Rotary Inversion AGFA AGFA-25 5:00 7:30 6:00 9:00 APX-100 4:00 8:00 5:00 9:30 AP-400 5:30 10:00 7:00 n/r* FUJI NEOPAN-SS 4:30 9:00 8:00 14:00 NEOPAN-400 NEOPAN-1600 3:00 5:50 4:00 7:00 ILFORD PAN F PLUS n/r* 3:00 4:30 5:30 FP4 PLUS n/r* n/r* 4:30 10:00 HP5 PLUS 5:00 8:00 8:00 n/r* 100 DELTA 4:30 n/r* n/r* n/r* 400 DELTA 8:00 n/r* n/r* n/r* KODAK TRI X PAN n/r* 5:00 n/r* 13:00 TMAX 100 5:00 7:00 8:00 12:00 TMAX 400 5:00 7:00 8:00 12:00 TMAX 3200 5:30 8:30 8:00 n/r* HS-IR 2481 5:00 9:00 8:00 n/r* n/r* - Not Recommended
Film Type/Speed Dilution 1:4 Dilution 1:6 Rotary Inversion Rotary Inversion AGFA AGFA-25 7:00 15:00 11:00 n/r* APX-100 2:00 4:00 4:00 4:30 AP-400 4:00 10:00 5:00 6:00 FUJI NEOPAN-SS 4:30 9:00 8:00 14:00 NEOPAN-400 NEOPAN-1600 3:00 5:50 4:00 7:00 ILFORD PAN F PLUS n/r* 3:00 4:30 5:30 FP4 PLUS n/r* n/r* 4:30 10:00 HP5 PLUS 5:00 8:00 8:00 n/r* 100 DELTA 4:30 n/r* n/r* n/r* 400 DELTA 8:00 n/r* n/r* n/r* KODAK TRI X PAN n/r* 5:00 n/r* 13:00 TMAX 100 5:00 7:00 8:00 12:00 TMAX 400 5:00 7:00 8:00 12:00 TMAX 3200 5:30 8:30 8:00 n/r* HS-IR 2481 5:00 9:00 8:00 n/r* n/r* - Not Recommended
Time correction factors for various temperatures.
For processing temperatures other than 20° Celsius find the film and recommended development time in table one or two and multiply by the appropriate factor listed below.
| 18°C (64° F) | 20°C (68° F) | 22°C (72° F) | 24°C (75° F) | 26°C (79° F) |
|
1.2 |
1 |
.85 |
.75 |
0.6 |
For a Celsius to Fahrenheit temperature conversion chart, go to the Conversion Tables page.