Instructions For The JOBO CPE-2 Plus Processor
#4065 (CPE-2 Plus) & #4069 (CPE-2 Plus Starter Kit)
Section 4
[CPE-2 Plus Starter Kit]
Back to TopInformation needed to operate your processor successfully with a wide variety of processes is included in this instruction manual. We urge you to read all the basic information contained in Section One and Section Two. Then read the pages of Section Three that describe the processes you wish to use. If you are having problems with your processor or processing, see the pages of Section Four. For conversions, tables and lists see Section Five.
If you have obtained this instruction manual as a replacement to earlier editions, use the process recommendations in this web page (where they are different), not the recommendations in the earlier manual(s). These instructions reflect the changes that have been made in film, paper, and chemicals since the original book was written. (If you already have processing procedures that completely satisfy you, don't change them just to match the directions in this web page.)
There are three types of special notations or cautionary information in this manual: Note, Caution, and Warning. The type and format of each is listed below:
Note: Text in this format is informative. It contains additional details to explain the basic information presented.
Caution: Text in this format presents important procedural information. Failure to follow these instructions could adversely affect the processing of your film or paper.
WARNING: Text in this format presents critical information. Possible damage to your equipment or personal injury could result from not following these instructions!
Copyright © 1997 by JOBO Fototechnic, Inc. All rights reserved. No portion of this web page may be reproduced in any form without express written consent from JOBO Fototechnic, Inc.
Every effort was made to include up-to-date and accurate information in this manual. All manufacturers, including JOBO, maintain the right to change specifications for their products. Changes may be made to specifications without notice. For the most current product specifications and usage, contact the manufacturer.
JOBO makes no claim for the accuracy or usability of other manufacturers' information contained in this manual. The processing recommendations included in this manual may not be optimal for every situation. If you require specific results, test all process instructions for suitability.
JOBO is not liable for any damages, direct or consequential, occurring from the use or misuse of information contained in this manual.
Credits:
Author: Damon Dean
JOBO Contributors: Ken Owen, Chris Mishler, Sam Proud, Paul Rowe
Manual part number 66051. Revision 06/97.
[CPE-2 Plus]
Section 2: General Processing Instructions
Section 4: Troubleshooting (all are links to additional pages)
- Introduction to Troubleshooting
- Troubleshooting, General Checklist
- Review Non-Processing Errors or Faults
- Mechanical Troubleshooting
- Processing
Faults for Specific Processes
- Processing Faults - Color Transparency Film E-6
- Processing Faults - Color Negative Film C-41
- Processing Faults - Black and White Film
- Processing Faults - Prints From Transparencies R-3000
- Processing Faults - Prints From Transparencies Ilfochrome
- Processing Faults - Print From Color Negative RA-4
- Processing Faults - Black and White Prints