Instructions for the CPA-2 and CPP-2 Processors
3. Differences Between the CPA-2 and the CPP-2 Processors
[CPP-2]
[CPA-2]
You may be wondering what the differences are between the CPA-2, and the CPP-2 Processors. Briefly, they are:
1 The temperature is set, displayed, and controlled digitally with the CPP-2. The temperature is set, controlled, and displayed with an analog dial and indicator light on the CPA-2.
 |
 |
2 The CPP-2 has a Cold Water Solenoid which allows processing at below room temperature. This solenoid also provides more rapid cooling of the tempering bath when changing from a higher to a lower process temperature. To accommodate the additional water from the solenoid, an overflow elbow is provided on the rear of the trough.
Note:
Because of these differences, it is not possible to upgrade a CPA-2 to a CPP-2.
Back to TopGo To:
1. Processor Specifications; CPA-2 and CPP-2
2. Safety First
3. Differences Between the CPA-2 and the CPP-2 Processors
6. Processor Maintenance and Tips
7. Processing Instructions for Film Using Magnet Drive
8. Processing Instructions for Prints Using Magnet Drive
9. Processing Using the JOBO Lift Accessory
10. Processing Instructions With the JOBO Lift Accessory
11. Precautions for Film and Paper Processing
12. Additional Processing Information
13. Spare Parts
14. Fuse Replacement