JOBO AG

Service Analog

Instructions for the CPA-2 and CPP-2 Processors

1. Processor Specifications; CPA-2 and CPP-2

[CPP-2]

[CPA-2]

• Tempering bath capacity: 4.75 gallons (18 liters)

• Base Area: 38 x 15 inches (96.5 x 38.1 cm), including overhang

• Chemical Solution Capacity: Four 260 ml (8 oz.) graduates; six 1000 ml (34 oz.) bottles

• Voltage: 120 Volts, 60 cycles (Hz) AC

• Power Consumption: 480 Watts, 4.4 Amps

• Accommodates tanks/drums: All 1500, 2500, 2800, and 3000 series

Note:

Tanks or drums with a first or last digit of '3' only work with the JOBO Lift accessory. Tanks with a last digit of '1' come with an attached magnet (#1504.) All tanks or drums (except extension modules) with a last digit of '0' require a magnet accessory (#1504), mounted on the bottom, to be used on the CPA-2 or CPP-2 Processor (without the JOBO Lift). The 1526 Combo Drum does not come with either a magnet or cog. To use any of the above tanks or drums with the JOBO Lift (except the ones already equipped with a cog), you must add a Cog (#1505). Install it in the lid of the tank or drum.

Reels:

1501 (35 mm, 1 or 2 120, 220), 1502 (2 110, or 16 mm 5' or 1.5 M maximum), 1555 (35 mm Stainless Steel), 1557 (120 Stainless Steel), 1559 (220 Stainless Steel) 2502 (35 mm, 1 or 2 120, 220), 2509N (4 x 5", 6 x 9 cm, 9 x 12 cm, up to six sheets), 2514 (4 x 5" Polaroid format, up to six sheets), 2517 (70 mm, 5' or 1.5 M maximum), 2518 (2 1/4 x 3 1/4" up to six sheets) 3073 (35 mm x 26' or 8 M maximum), 3075 (70 mm x 16.4' or 5 M maximum). See Appendix for table and illustrations of tanks and reel capacity.

Accessories:

CPA-2/CPP-2 JOBO Lift (#4072); additional or replacement: Black Bottle 1000 ml (#3372), White Bottle 1000 ml (#3373), Graduate 260 ml (3308), Color Thermometer (#3321).

For other JOBO products that will enhance the use of your processor, check your JOBO catalog, talk to your JOBO dealer, or call JOBO Customer Service at (734) 677-6989, ext. 4721. Our hours are from 8 a.m. to 5 p.m. Eastern Time, Monday through Friday, but our voice mail answering system is available 24 hours a day. You may fax us at (734) 677-6963. If you wish to write us, our address is: JOBO Fototechnic, P. O. Box 3721, Ann Arbor, MI 48106-3721, USA. We will be happy to help you.

Go To:

1. Processor Specifications; CPA-2 and CPP-2

2. Safety First

3. Differences Between the CPA-2 and the CPP-2 Processors

4. Processor Description

5. Cleaning the Processor

6. Processor Maintenance and Tips

7. Processing Instructions for Film Using Magnet Drive

8. Processing Instructions for Prints Using Magnet Drive

9. Processing Using the JOBO Lift Accessory

10. Processing Instructions With the JOBO Lift Accessory

11. Precautions for Film and Paper Processing

12. Additional Processing Information

13. Spare Parts

14. Fuse Replacement

For more detailed lift information, read the CPA-2/CPP-2 JOBO Lift Instruction Manual.