Service
Analog
Instruction Manual
for the Fujimoto CP51
Roller Transport Processor
Index
Introduction
It is important to read completely through the following instructions before using the processor. Although the machine is easy to use, there are important aspects of it which may not be obvious without learning of them in this manual.
The Main Body plus either the Wash Dry Module or the Stabilize Dry Module make up a complete dry-to-dry print processor. However, the Main Body can be used alone, followed by manually washing and drying the prints after they come out of the Bleach/Fix.
Features of CP-51 Processor
- Consistent print development is ensured due to automatic chemical replenishment measuring both width and length of the paper, as well as automatic temperature control of solution temperatures.
- Print sizes from 3 x 4" to 20 x 30" can be processed.
- Once the light-tight cover of the processor has been closed, development can take place in daylight.
- Each solution bath needs only 6 liters of chemicals, keeping solution costs low.
- The roller-transport system enables quick and smooth print processing.
- Long life is assured for both the chemicals and rollers by a ventilation fan preventing excess condensation. Standby circuitry reduces aeration of the solutions while protecting the rollers, and magnetic circulation pumps minimizing oxidation by intermittently turning off the processor during unused periods of operation.
Index